WolGuard Hardware Help

Information on what hardware can be used with WolGuard.

WolGuard is only fully compatible with two devices. It is an Android-only app which means it is not accessible for any Apple or Windows products. And is optimized for use with heavy duty devices with built-in scanners made by CipherLab.

Please Note: WolGuard is only supported for devices using Android version 5.0 and above.

CipherLab Devices

Compatible devices for WolGuard are the RS31 and RS50 series by CipherLab.

These have built-in RFID, Barcode, and QR Code scanning technology which integrate seamlessly with the WolGuard app. This allows users to quickly find and manage the presence of employees and contractors by scanning a code or tapping an RFID card associated with their profile.

Find out more about these devices at the CipherLab Website.

Hardware Tips

Sleep

The sleep setting indicates how long the device will stay active with no activity, once the device goes into sleep it will be locked. You can adjust the sleep settings on your device:

  1. Navigate to the Settings menu.
  2. Under Device, select Display.
  3. Select Sleep.
  4. Choose your sleep setting.

If you do not want the device to lock when it goes to sleep, you can adjust the settings so that it does not go into sleep mode automatically.

Security

You can set different levels of security to lock your devices. The options are; None, Swipe, Pattern, Voice Unlock, PIN, or Password. To adjust the security settings:

  1. Navigate to the Settings menu.
  2. Under Personal, select Security.
  3. Select Screen Lock.
  4. Choose your screen lock type.
  5. If a high level of security, configure the settings.

If you have a number of different users, you may not want to secure the device as tightly, because everyone using the device will need to know how to unlock the device.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request